MS58-3320D13M4

Parking Lot Light Motion Detector

MS58-3320D13M4 is a radar+embedded BLE solution module developed by the TUYA and MoreSense. It mainly consists of a highly integrated BLE chip (TLSR8250F512ET32), radar IC and a small amount of peripheral circuits, built-in BLE network communication stack and rich library functions. This IOT sensor module contains a low-power 32-bit MCU, Bluetooth 5.0/2.4G Radio,4Mbits flash, 48Kbyte SRAM and 5 reusable IO ports. It is a radar sensing solution which is not affected by ambient temperature, humidity, airflow, dust, noise, light and darkness. Module built-in multiple filtering algorithms, anti-interference ability, and the signal can penetrate the glass, acrylic and other non-metallic materials. It can be used to the application detecting moving targets sensing, especially suitable for garage/parking lot lighting.

Product Features

Microwave radar sensor based on Doppler effect;
Working Frequency: 5.8G ISM frequency band;
Sensing distance and delay time can be adjusted flexibly according to different application;
Using mature CMOS technology to achieve fully integration of ultra-cost-effective;
The chip has a built-in LDO that supports wide-voltage power supply;
Support standard UART or I2C interface,which can be interconnected with other MCU or sensors;
Support two working modes of normal power consumption and ultra-low power consumption;
Meet the certification standards such as FCC,RED,CE and ETL;

Specification

Item #	MS58-3320D13M4
Solution	BLEmesh+Radar
Pre-Distribution Mode	Sensor Mode -Off (Always on/off)
Post-Distribution Mode	Sensor Mode -On (Auto Mode)
Power-On Self-Test Time	2 to 3s
Sensing Output Level	PWM (3.3V)
Silent Output Level	0V
Sensing Sensitivity	80% (as default, adjustable)
Sensing Brightness	100% (as default, adjustable)
Sensing Delay Time	10s(as default, adjustable)
Sensing Time	10s(as default, adjustable)
Slight/Normal Brightness	10%
Slight/Normal Time	∞(as default, adjustable)
Max. Sensing Distance with Assembly Height 3m	15 meters in diameter
Setting Parameter Method	Remote & APP & SaaS Adjustable
Place of Origin	Shenzhen,R.P.China
Brand Name	MoreSense

Pin Definition

Table.1 MS58-3320D13M4 Pin Function Definition

Pin	Name	Type	Discription
1	VIN	I/O	Ordinary l0 port, can be used as LED driving PWM output corresponds to TL C2 of lC.
2	GND	I/O	Ordinary l0 port, can be used as LED driving PWM outputcorresponds to TL C3 of lC.
3	OUT	I/O	Ordinary TO port, can be used as LED driving PWM outputcorresponds to TLD2 of TC.
4	OUT	I/O	Ordinary l0 port, can be used as LED driving PWM outputcorresponds to TL B4 of IC.
5	OUT	I/O	Ordinary l0 port, can be used as LED driving PWM outputcorresponds to Tl B5 of iC.
6	OUT	P	PCBA Power Pin (5V)
7	OUT	P	Connect llC, Clock Pin(CLK)
8	OUT	I/O	Sensing Signal Output
9	TX	I/O	Connect llC, Data Pin
10	RX	I	Hardware Reset Pin (Active Low), Corresponds To IC RESETB