Product Features
* Complies with 802. 11 b/g/n 1×1;
* 20 MHz bandwidth and STBC;
* Support for STA,AP,
* 2*UART, IIC interface,SPI interface
* Six PWM outputs supporting high-speed or low-power clocks, four high-speed 10-bit multi-channel ADCs.
* Embedded eFUSE and support for OTP read and write within FLASH, which can be used to provide a unique serial number,code encryption, and secure debug interfaces.A true random number generator and security module are integrated internally to ensure secure communication and fast authentication and network connectivity.
* Distinguish between power-on reset and WDT-reset.
* Every 2 PWMs can be configured for phase-controllable differential mode to
support motor and strip drive;
* 32-bit single-core processor with main frequencies up to 160MHz;
* 272KBROM;
.*Embedded flash 2M.
* Low powered.
Specification
Item #
|
MSWBL2213 |
Wireless Protocol |
WIFI 802.11 b/g/n AND BLE BLE5.2 |
Frequency Range
|
WIFI: 2.412GHz-2.472GHz BLE: 2.4GHz:2.402-2480MHz |
Transmit Power
|
WIFI:
BLE: 10dbm |
Receiving Sensitivity |
WIFI:
BLE: -90dBm |
Data Interface
|
GPIO/SPI
|
Operating Voltage
|
3.0~3.6V
|
Operating Current |
Peak(continuous transmission): 260mA Average (STA,connected and standby): 24mA (DTIM1) Bail-in power link: 240uA (DTIM10) Average (STA, 1KB/s): 54mA Average (AP): 85mA |
Dimension
|
22.5mm x 13.5mm x 3mm |
Wireless Network Type |
STA/AP/AP+STA/BLE5.2 |
Security Mechanism |
WEP/WPA-PSK/WPA2-PSK/WPA3-PSK |
Encryption Type |
WEP64/WEP128/TKIP/AES |
Firmware Upgrading |
Local-Wireless
Remote-Upgrade |
Customization |
Provide SDK for customer’s 2nd development |
Network Protocol |
IPv4,TCP/UDP/HTTP/MQTT |
User Configuration | AT+ command set,Web page
Android/iOS terminal BLE networking app |
Place of Origin
|
Shenzhen,R.P.China
|
Brand Name
|
MoreSense |
Pin Definition
Table.1 MSWBL2213 Pin Function Definition
Pin | Name | Type | Discription |
---|---|---|---|
1 | P10 | I/O/T | No Used-NC |
2 | P11 | I/O/T | No Used-NC |
3 | P15 | I/O/T | No Used-NC |
4 | P17 | I/O/T | No Used-NC |
5 | P0 | O | 3.3V UART0 Output |
6 | P1 | I | 3.3V UART0 Input |
7 | P20 | I/O/T | No Used-NC |
8 | P26 | I/O/T | No Used-NC |
9 | P24 | I/O/T | No Used-NC |
10 | EN | I | Module Reset
Low active hardware reset input pin,there has internal reset circuit,external pull-up resistance is not allowed,avoiding prolong the reset time and cause abnormal startup. |
11 | P9 | I/O/T | No Used-NC |
12 | P8 | I/O/T | No Used-NC |
13 | P7 | I/O/T | No Used-NC |
14 | P6 | I/O/T | No Used-NC |
15 | VCC | Power Supply | |
16 | GND | Grouded |
Related Modules
Application
Sphygmomanometer
Electronic Scale
Message Chair